Order Products : sales@su-jiao.com
Spartech Polycom SCR1-5009
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EQ7Rwq_Spartech-Polycom-SCR1-5009.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SCR1-5009 is a low viscosity, ABS resin for injection molding. It is heat stabilized and lubricated for good processing characteristics, and it exhibits good impact and chemical resistance. With the benefit of low moisture absorption, ABS can be used in a variety of environments. Being a very versatile product, SCR1-5009 can be used for industrial, transportation, sporting goods and electrical/electronic applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 14 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 41.4 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 240 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 92.5 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 210 - 240 | °C | |
| Middle Temperature | 215 - 245 | °C | |
| Front Temperature | 220 - 250 | °C | |
| Nozzle Temperature | 218 - 260 | °C | |
| Processing (Melt) Temp | 218 - 260 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MTEGRITY™ LLDPE LL106AM | M. Holland Company | LLDPE | MTEGRITY™ LLDPE |
| Viton® C-10 | DuPont Performance Elastomers | Fluorelastomer | Viton® |
| Clariant Nylon 6/6 PA-133 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Hipolyene 8110 | Zylog Plastalloys | TPO (POE) | Hipolyene |
| Lighter™ C98 | Equipolymers | PET | Lighter™ |
