Order Products : sales@su-jiao.com
Smooth-On TASK 16®
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Smooth-On, Inc |
| Trademark: | Smooth-On |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EPBasu_Smooth-On-TASK-16-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TASK®16 is a low odor, fast-setting Shore 80A/30D urethane that offers very high tear strength, impact resistance and wear resistance. TASK®16 is phthalate free, mercury free and MOCA free. Mixed one part A to two parts B by weight, TASK®16 pours easily. Working time is 6 minutes and handling time is 90 minutes at room temperature. Cured rubber has exceptional performance characteristics and dimensional stability. TASK® 16 can be colored with SO-Strong® or Ignite® colorants. TASK®16 is suitable for making fast mechanical parts, gaskets, wheels and pullies, impact resistant props, and archival master models. It is also used to make fast, wear resistant rubber molds for casting concrete or concrete stamping pads. TASK®16 is also an excellent choice for rotocasting to create hollow semi-rigid castings. (formerly Flex Urethane 100-184) |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D1475 |
| Specific Volume | 0.926 | cm³/g |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cure Time - Full (23°C) | 1.0 | day | |
| Handle Time (23°C) | 1.5 | hr |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 2.5 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 80 | ||
| Shore D | 30 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 5.90 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 15.6 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 230 | % | ASTM D412 |
| Tear Strength 1 | 34.5 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 4.59 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.064 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 | ||
| Pot Life (23°C) | 6.0 | min | ASTM D2471 |
| Thermoset Mix Viscosity | 1400 | cP | ASTM D2393 |
| Post Cure Time (66°C) | 4.0 to 8.0 | hr |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 2910-55 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Yanshan PE 1500J | SINOPEC Beijing Yanshan Petrochemical | HDPE | Yanshan PE |
| Evatane® 18-150 | Arkema | EVA | Evatane® |
| ExxonMobil™ LDPE LD 144BR | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |
| FERREX® GPP20CG42HB BLUE | Ferro Corporation | PP Homopolymer | FERREX® |
