Order Products : sales@su-jiao.com
Hypel® PELD20/.920
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Entec Polymers |
| Trademark: | Hypel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EL3lQ9_Hypel-PELD20-920.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hypel® PELD20/.920 is a Low Density Polyethylene material. It is available in North America. Important attributes of Hypel® PELD20/.920 are:
Typical application of Hypel® PELD20/.920: Food Contact Applications |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 1.0 to 5.0 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 11.0 | MPa | |
| Break, 23°C | 8.27 | MPa | |
| Tensile Elongation (Break, 23°C) | 90 | % | ASTM D638 |
| Flexural Modulus - 2% Secant (23°C) | 228 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AvaSpire® AV-621 CF30 | Solvay Specialty Polymers | PAEK | AvaSpire® |
| KRYSTALFLEX™ PE192 | Huntsman Corporation | PUR-Eth,aliphat | KRYSTALFLEX™ |
| INFUSE™ 9500 | The Dow Chemical Company | OBC | INFUSE™ |
| LNP™ LUBRICOMP™ EX03599H compound | SABIC Innovative Plastics | PEI | LNP™ LUBRICOMP™ |
| POLYCOMPO PE 5600B | POLYCOMPO Co.,Ltd. | HDPE | POLYCOMPO PE |
