Order Products : sales@su-jiao.com
RTP 2399 A X 68911 B
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EK3g1k_RTP-2399-A-X-68911-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.57 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.10 - 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 14500 | MPa | ASTM D638 |
| Tensile Strength | 207 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 1.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 12400 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 358 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 320 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1200 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 143 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 221 - 243 | °C | |
| Middle Temperature | 221 - 243 | °C | |
| Front Temperature | 221 - 243 | °C | |
| Mold Temperature | 52.0 - 93.0 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® CP-19129 | Teknor Apex Company | TPE | Monprene® |
| Hyundai EP Adhesives LE200TS/5900 | HYUNDAI EP Co., Ltd. | PE, Unspecified | Hyundai EP Adhesives |
| INNOPOL® PP CS 1-3120 MA | Inno-Comp Ltd. | PP Homopolymer | INNOPOL® PP |
| INSPIRE™ T710-25 ES | Trinseo | PP, Unspecified | INSPIRE™ |
| Plenco 07591 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
