Order Products : sales@su-jiao.com

SCLAIR® FP120 Series

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	SCLAIR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	EGQCb6_SCLAIR-FP120-Series.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

FP120-A (Processing AO only): General purpose film, coextrusion and lamination
FP120-C (PPA): General purpose film, coextrusion and lamination
FP120-CN (PPA, gas-fade-resistant processing AO): Food packaging, freezer film, lamination and sealant film
FP120-D (1000 ppm Slip, 2500 ppm AB, PPA): Food packaging, freezer film, lamination and sealant film
FP120-F (3000 ppm AB, PPA): Heavy duty shipping sacks, high strength packaging

General Information
Additive	FP120-D: Antiblock (2500 ppm); Processing Aid; Slip (1000 ppm) FP120-F: Antiblock (3000 ppm); Processing Aid FP120-CN: Anti-gas fading; Antioxidant; Processing Aid FP120-A: Antioxidant FP120-C: Processing Aid
Features	Antiblocking Antioxidant Food Contact Acceptable General Purpose Good Heat Seal Good Toughness High Strength Low Density Octene Comonomer Slip
Uses	Film Food Packaging General Purpose Heavy-duty Bags Laminates
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1a 2 FDA 21 CFR 177.1520(c) 3.2a 3
Forms	Pellets
Processing Method	Coextrusion Film Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.920	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	25	µm
Secant Modulus			ASTM D882
1% Secant, MD : 25 µm, Blown Film	175	MPa
1% Secant, TD : 25 µm, Blown Film	195	MPa
Tensile Strength			ASTM D882
MD : Yield, 25 µm, Blown Film	10.0	MPa
TD : Yield, 25 µm, Blown Film	10.0	MPa
MD : Break, 25 µm, Blown Film	48.0	MPa
TD : Break, 25 µm, Blown Film	32.0	MPa
Tensile Elongation			ASTM D882
MD : Break, 25 µm, Blown Film	480	%
TD : Break, 25 µm, Blown Film	670	%
Dart Drop Impact (25 µm, Blown Film)	270	g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD : 25 µm, Blown Film	420	g
TD : 25 µm, Blown Film	610	g

Optical	Nominal Value	Unit	Test Method
Gloss (45°, 25.0 µm, Blown Film)	59		ASTM D2457
Haze (25.0 µm, Blown Film)	10	%	ASTM D1003

Additional Information	Nominal Value	Unit	Test Method
Low Friction Puncture - Blown Film (25.0 µm)	360	J/cm	Internal Method

Resin Grade	Manufacturer	Category	Trademark
RTP 200D AR 15 TFE 5	RTP Company	Nylon 612	RTP
POLYLAC® PA-709	CHI MEI CORPORATION	ABS	POLYLAC®
Restren ABS 766/V0	Polimarky Spolka Jawna	ABS	Restren
Keysor PVC KC1500	Keysor-Century Corporation	PVC, Unspecified	Keysor PVC
Jiangsu Meilan XXMLF3-14	Jiangsu Meilan Chemical Co., Ltd.	Fluorelastomer	Jiangsu Meilan