Order Products : sales@su-jiao.com
ISPLEN® PB-131 N5E
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EDxKyY_ISPLEN-PB-131-N5E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISPLEN® PB-131 N5E is a block ethylene-propylene copolymer with a high molecular weight. Due to averagely good flow properties and very high mechanical properties is a suitable grade to be processed into pipes. Its very high impact strength, even at low temperatures, and stress cracking also can use in critical conditions. ADDITIVATION ISPLEN®PB-131 N5E contains stabilizers and additives according to the end-use of the item in order to reinforce the thermal stability. The processor may include other additives. Formulation allows polymer stability during the normal conditions of processing and use. COLOURING ISPLEN grades are supplied in natural colour but they can be easily coloured with pigments steady at processing temperatures, using dry -colouring or masterbatch techniques. FOODSTUFF REGULATIONS ISPLEN® PB-131 N5E is approved for food contact under certain legislation. For more information about specific country regulation, please, contact with our Technical Service. ISPLEN® PB 131 N5E is a heterophasic copolymer with medium-low fluidity designed for extrusion applications. It has good processability and high mechanical properties especially high impact strength, even at low temperatures. ISPLEN® PB 131 N5E can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. It has a very high impact resistance. TYPICAL APPLICATIONS In extrusion and blow-moulding processes, such as:
Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.903 to 0.905 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.1 to 1.3 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 77 | ASTM D785 | |
| Shore Hardness (Shore D) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 25.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 500 | % | ISO 527-2 |
| Flexural Modulus | 1100 to 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -20°C | 8.0 | kJ/m² | |
| 23°C | > 60 | kJ/m² | |
| Notched Izod Impact Strength | ISO 180/1A | ||
| -20°C | 100 | kJ/m² | |
| 23°C | 170 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 83.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 150 | °C | ISO 306/A |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 to 200 | °C | |
| Cylinder Zone 2 Temp. | 190 to 205 | °C | |
| Cylinder Zone 3 Temp. | 195 to 210 | °C | |
| Cylinder Zone 4 Temp. | 195 to 215 | °C | |
| Cylinder Zone 5 Temp. | 200 to 220 | °C | |
| Melt Temperature | 205 to 225 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MALECCA K-090 | Denka Company Limited | ABS | MALECCA |
| POPELEN G-151 | Lotte Chemical Corporation | PP Impact Copolymer | POPELEN |
| Monprene® CP-32053G CLR | Teknor Apex Company | TPE | Monprene® |
| BJB Polyurethane SC-89 | BJB Enterprises, Inc. | TSU | BJB Polyurethane |
| Generic PPA - Aramid Fiber | Generic | PPA | Generic |
