Order Products : sales@su-jiao.com
INEOS HDPE G50-100
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EDbgIF_INEOS-HDPE-G50-100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| G50-100 is a high molecular weight, high density polyethylene copolymer developed for sheet extrusion, thermoforming, and large part blow molding where the finished product demands outstanding physical performance. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 10 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 264 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 67 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 25.9 | MPa | |
| Break | 35.9 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 10 | % | |
| Break | 920 | % | |
| Flexural Modulus | ASTM D790A | ||
| 2% Secant | 947 | MPa | |
| Tangent | 1220 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 410 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | 40.5 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 71.7 | °C | ASTM D648 |
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Oxidation Induction Time (210°C) | > 21 | min | ASTM D3895 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| STYRON™ C-TECH HIPS | Trinseo | PS (HIPS) | STYRON™ C-TECH |
| VESTAMID® Care ML18 | Evonik Industries AG | Nylon 12 | VESTAMID® Care |
| OnForce™ LFT PP-30LGF/001 UV Black | PolyOne Corporation | PP Homopolymer | OnForce™ LFT |
| ADENE® O05XQB-00 | A.D. Compound S.p.A. | PP Homopolymer | ADENE® |
| Hostacom TRC 411N G61527 | LyondellBasell Industries | PP Copolymer | Hostacom |
