Order Products : sales@su-jiao.com

KUBE PIR 22401

Category:	HDPE , High Density Polyethylene
Manufacturer:	KUBE Electronics AG
Trademark:	KUBE PIR
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ECfvNT_KUBE-PIR-22401.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Transmissive Plastic Injection Molding Granulates For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers Features: The best material for fresnel lenses Specially suited for thin parts High transmission in the 7 to 14 µm central passive infrared (PIR) band Choice of colors and MFI RoHS and TSCA conform Excellent visible light absorption available for low false alarm rate / VDS conformity Special colors available on request According to KUBE's experience, these materials exhibit no substantial loss of specification over 10 years 22401: whitish (60% 22300 + 40% 22400a)

Message

Transmissive Plastic Injection Molding Granulates

For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers

Features:

The best material for fresnel lenses

Specially suited for thin parts

High transmission in the 7 to 14 µm central passive infrared (PIR) band

Choice of colors and MFI

RoHS and TSCA conform

Excellent visible light absorption available for low false alarm rate / VDS conformity

Special colors available on request

According to KUBE's experience, these materials exhibit no substantial loss of specification over 10 years

22401: whitish (60% 22300 + 40% 22400a)

General Information
Features	Flame Retardant Good UV Resistance
Uses	Lenses Thin-walled Parts
RoHS Compliance	RoHS Compliant
Appearance	Colors Available White
Forms	Granules

Physical	Nominal Value	Unit	Test Method
Density	0.951 to 0.960	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	17	g/10 min	ISO 1133

Injection	Nominal Value	Unit
Drying Temperature	< 70.0	°C
Drying Time	2.0	hr
Hopper Temperature	50.0 to 70.0	°C
Rear Temperature	170 to 220	°C
Middle Temperature	200 to 220	°C
Front Temperature	210 to 220	°C
Nozzle Temperature	220 to 230	°C
Processing (Melt) Temp	130	°C

Resin Grade	Manufacturer	Category	Trademark
Primefin V515TL40	Lucent Polymers, Inc.	PP, Unspecified	Primefin
NEXT SIGNATURE PBT G30-100	NEXT Specialty Resins, Inc.	PBT	NEXT SIGNATURE
ADENE NCQAGD	A.D. Compound spa	PP Copolymer	ADENE
Ebalta MG 321 FR / Comp. A+B	Ebalta Kunststoff GmbH	PUR, Unspecified	Ebalta
Moplen HP525J	PolyMirae	PP Homopolymer	Moplen