Order Products : sales@su-jiao.com
Generic TS, Unspecified
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ECZ5Tp_Generic-TS-Unspecified.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic TS, Unspecified This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 to 1.81 | g/cm³ | ASTM D792 |
| Apparent Density | 1.00 to 1.51 | g/cm³ | ASTM D1895 |
| Bulk Factor | 1.0 | ASTM D1895 | |
| Molding Shrinkage - Flow (23°C) | 0.097 to 0.10 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.10 to 0.22 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 24 to 85 | ASTM D2240 | |
| Barcol Hardness | 40 to 41 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 317 to 13800 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 1.39 to 8.27 | MPa | |
| 23°C | 18.3 to 159 | MPa | |
| Tensile Elongation (Yield, 23°C) | 3.4 to 700 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2170 to 13800 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 65.2 to 163 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 0.0621 to 221 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 12 to 770 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 46.2 to 260 | °C | ASTM D648 |
| CLTE - Flow | 2.2E-5 to 8.6E-4 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity (23°C) | 0.15 to 0.19 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 7.9E+11 to 1.9E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 11 to 86 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 2.59 to 3.58 | ASTM D150 | |
| Dissipation Factor (23°C) | 4.0E-4 to 2.9E-3 | ASTM D150 | |
| Arc Resistance | 50.0 to 181 | sec | ASTM D495 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shelf Life (23°C) | 26 to 52 | wk | |
| Thermoset Mix Viscosity | 35.0 to 9030 | cP | ASTM D2393 |
| Demold Time | 1400 to 4300 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RECLAIR® F 10820 | Reliance Industries Limited | LLDPE | RECLAIR® |
| Spartech Polycom SC5-4530U | Spartech Polycom | PP Copolymer | Spartech |
| ABS Proquigel GSE | Proquigel | ABS | ABS Proquigel |
| MAXATEL® ACGC25A-NAT | Pier One Polymers, Inc. | Acetal (POM) Copolymer | MAXATEL® |
| ARLEN™ AE4200 | Mitsui Chemicals America, Inc. | Nylon 6T | ARLEN™ |
