| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EAM4DQ_KRATON-E1830-H.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
Kraton E1830 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below.
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | < 1.0 | g/10 min | ASTM D1238 |
| Antioxidant Additive 1 | 0.10 to 0.18 | % | Internal Method |
| Polystyrene Content 2 | 31 to 35 | % | Internal Method |
| Total Extractables | < 1.6 | % | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 30 sec, Compression Molded) | 61 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 3(300% Strain) | 5.52 | MPa | Internal Method |
| Tensile Strength 4(Yield) | > 24.1 | MPa | Internal Method |
| Tensile Elongation 5(Break) | 930 | % | Internal Method |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| 2 . | Measured on the polymer before hydrogenation. |
| 3 . | Typical properties determined on film cast from toluene solution |
| 4 . | Typical properties determined on film cast from toluene solution |
| 5 . | Typical properties determined on film cast from toluene solution |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ 2110 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| NuSil MED-4211 | NuSil Technology | Silicone | NuSil |
| DIOSHY® MP-830 | DIOSHY Co.,Ltd. | SBS | DIOSHY® |
| Hylon® N2050HL | Ravago Manufacturing Americas, LLC | Nylon 6 | Hylon® |
| Hy-Vin® XA80207 | INEOS Compounds | PVC, Flexible | Hy-Vin® |