Order Products : sales@su-jiao.com
Generic Phenolic - Organic
| Category: | Phenolic , Phenolic |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E8wm5y_Generic-Phenolic---Organic.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Phenolic - Organic This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.36 - 1.43 | g/cm³ | ASTM D792 |
| 23°C | 1.38 - 1.72 | g/cm³ | ISO 1183 |
| Apparent Density | 0.52 - 0.65 | g/cm³ | ASTM D1895 |
| Molding Shrinkage | |||
| Flow : 23°C | 0.26 - 1.1 | % | ASTM D955 |
| 23°C | 0.43 - 0.70 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | 0.28 - 0.48 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 68 - 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 7290 - 9360 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 34.0 - 62.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 0.59 - 0.91 | % | ASTM D638 |
| Flexural Modulus (23°C) | 6160 - 8740 | MPa | ASTM D790 |
| Flexural Strength | |||
| 23°C | 65.1 - 97.0 | MPa | ASTM D790 |
| 23°C | 70.0 - 128 | MPa | ISO 178 |
| Compressive Strength (23°C) | 175 - 217 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 17.8 - 20.2 | J/m | ASTM D256 |
| Notched Izod Impact (23°C) | 15 - 24 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, not annealed | 148 - 188 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 115 - 199 | °C | ISO 75-2/A |
| Continuous Use Temperature | 183 - 208 | °C | ASTM D794 |
| CLTE - Flow | 2.1E-5 - 7.0E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 6.4E+10 - 2.1E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 7.2 - 16 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 4.47 - 6.16 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.038 - 0.061 | ASTM D150 | |
| Arc Resistance | 120 - 144 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | 150 - 175 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 24 - 29 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 60.0 - 74.0 | °C | |
| Processing (Melt) Temp | 107 - 110 | °C | |
| Mold Temperature | 173 - 175 | °C | |
| Injection Pressure | 8.60 - 175 | MPa | |
| Back Pressure | 0.200 - 0.445 | MPa | |
| Screw Speed | 60 | rpm |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Phenolic - OrganicThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SIVIC® 3200 | SIDIAC | NBR | SIVIC® |
| Colorite G Series 6011G-015 | Colorite Polymers | PVC, Flexible | Colorite G Series |
| DIC.PPS FZ-1140-D5 | DIC Corporation | PPS | DIC.PPS |
| GAPEX® FPP20GQ12HB-BK | Ferro Corporation | PP, Unspecified | GAPEX® |
| Sylvin 4280-70UV Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
