Borstar® ME6052 Datasheet,MDPE,Borealis AG-SHANGHAI SUSHENG

Borstar® ME6052

Category:	MDPE , Medium Density Polyethylene
Manufacturer:	Borealis AG
Trademark:	Borstar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	E7xlFs_Borstar-ME6052.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Borstar ME6052 is a black bimodal polyethylene jacketing compound, based on a medium density base resin, which is produced with the Borealis proprietary Borstar bimodal process technology. Borstar technology allows the manufacturing of polymers outside the traditional MFR and density range making it possible to optimize processability, reduce shrinkage and yet provide excellent physical toughness and environmental stress crack resistance (ESCR). Borstar ME6052 contains 2.5% well-dispersed carbon black in order to ensure excellent weathering resistance. Borstar ME6052 offers a balance of properties giving advantages in manufacturing, installation and lifetime performance of communication and energy cables. Borstar ME6052 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: ASTM D 1248 Type II, Class C, Category 4, Grade E8, E9, J4 BS 6234: Type H03C, TS2 DIN 57818/VDE 0818 EN 50290-2-24 HD 620 S1, Part 1, table 4B, DMP 2, 9, 10, 12, 14, 15 IEC 60502, Type ST3 IEC 60502, Type ST7 IEC 60708 IEC 60840, Type ST3 IEC 60840, Type ST7 ISO 1872-PE, KCHL, 33 D-006 NF C32-060

Message

Borstar ME6052 is a black bimodal polyethylene jacketing compound, based on a medium density base resin, which is produced with the Borealis proprietary Borstar bimodal process technology.

Borstar technology allows the manufacturing of polymers outside the traditional MFR and density range making it possible to optimize processability, reduce shrinkage and yet provide excellent physical toughness and environmental stress crack resistance (ESCR).

Borstar ME6052 contains 2.5% well-dispersed carbon black in order to ensure excellent weathering resistance.

Borstar ME6052 offers a balance of properties giving advantages in manufacturing, installation and lifetime performance of communication and energy cables.

Borstar ME6052 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure:

ASTM D 1248 Type II, Class C, Category 4, Grade E8, E9, J4

BS 6234: Type H03C, TS2

DIN 57818/VDE 0818

EN 50290-2-24

HD 620 S1, Part 1, table 4B, DMP 2, 9, 10, 12, 14, 15

IEC 60502, Type ST3

IEC 60502, Type ST7

IEC 60708

IEC 60840, Type ST3

IEC 60840, Type ST7

ISO 1872-PE, KCHL, 33 D-006

NF C32-060

General Information
Additive	Carbon black (3%)
Features	Moisture resistance High ESCR (Stress Cracking Resistance) Good UV resistance Workability, good Good wear resistance Scratch resistance Good weather resistance Good toughness Low shrinkage High hardness
Uses	Communication Cable Jacketing Cable sheath Cable sheath Wire and cable applications
Agency Ratings	ASTM D 1248, II, Class C, Cat. 4 Grade E8, E9, J4 BS 6234 Type H03 C TS2 EN 50290-2-24 HD 620 S1 Part 1, table 4B, DMP 2, 9, 10, 12, 14, 15 IEC 60502 Type ST7 IEC 60502 Type ST3 IEC 60708 IEC 60840 Type ST3 , Type ST7 NF C 32-060
Appearance	Black
Forms	Particles
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density			ISO 1183
-- ¹	0.936	g/cm³	ISO 1183
-- ²	0.948	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg	0.70	g/10 min	ISO 1133
190°C/5.0 kg	3.0	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance ³(Condition B, 50°C, 10% Igepal, F0)	> 5000	hr	IEC 60811-4-1/B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 1 sec)	54		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	30.0	MPa	ISO 527-2/50
Tensile Strain (Break)	800	%	ISO 527-2/50
Flexural Modulus	700	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -76.0	°C	ASTM D746

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity ⁴	1.0E+16	ohms·cm	IEC 60093
Dielectric Strength	20	kV/mm	IEC 60243-1

Additional Information	Nominal Value	Unit	Test Method
Pressure Test ⁵(115°C)		%	IEC 60811-3-1

Extrusion	Nominal Value	Unit
Drying Temperature	90.0	°C
Melt Temperature	185 - 190	°C

Extrusion instructions
Preheating: 90 °CCooling water: 60 °C

Note Message
1 .	Base Resin, ISO 1872-2
2 .	Compound, ISO 1872-2
3 .	No crack
4 .	Compound
5 .	at high temperature, 6 hrs

Resin Grade	Manufacturer	Category	Trademark
Stat-Rite® S-240N	Lubrizol Advanced Materials, Inc.	PP Alloy	Stat-Rite®
TOYOBO PPS TS501	TOYOBO America, Inc.	PPS	TOYOBO PPS
Wondel® A AG6	Nanjing Julong Engineering Plastics Co., LTD	Nylon 66	Wondel® A
Akulon® S223-F	DSM Engineering Plastics	Nylon 66	Akulon®
Rotec® ABS 1001 GK20	ROMIRA GmbH	ABS	Rotec® ABS

Resin Grade

Manufacturer