Order Products : sales@su-jiao.com
OP - PC - Filled PC B15-7SS
| Category: | PC , Polycarbonate |
| Manufacturer: | Oxford Polymers |
| Trademark: | OP - PC - Filled |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E6HnzS_OP---PC---Filled-PC-B15-7SS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EMI / ESD SHIELDING |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 14 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 - 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 58.6 | MPa | ASTM D638 |
| Fracture | 58.6 | MPa | ASTM D638 |
| Flexural Modulus | 3450 | MPa | ASTM D790 |
| Flexural Strength | 100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (4°C) | 96 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.18mm | 152 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 3.18mm | 141 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | HB | UL 94 | |
| 3.18 mm | HB | UL 94 |
| Additional Information |
|---|
| Melt Mass- Flow Rate (MFR), ASTM D1238, 230°C/ 3.8kg: 10 to 18 g/10 minSurface Resitivity, ASTM D257: 1E1 to 1E3 ohms |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 93.3 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Drying Time, Maximum | 8.0 | hr | |
| Rear Temperature | 282 - 293 | °C | |
| Middle Temperature | 282 - 293 | °C | |
| Front Temperature | 288 - 293 | °C | |
| Processing (Melt) Temp | 293 - 327 | °C | |
| Mold Temperature | 82.2 - 104 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Teldene® H25FBA | National Petrochemical Industries Company (NATPET) | PP Homopolymer | Teldene® |
| Titalon® 2330GMS | Titan Plastics Compounds Co., Ltd. | Nylon 66 | Titalon® |
| Nycal™ 1850T1H | Technical Polymers, LLC | Nylon 6 | Nycal™ |
| Huafon JF-S-AY8045 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| Sylvin 8826-65FUV Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
