Order Products : sales@su-jiao.com
Fluoraz FEPM 797
| Category: | FEP , Perfluoroethylene Propylene Copolymer |
| Manufacturer: | Greene, Tweed & Co. |
| Trademark: | Fluoraz |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E5Y6Mu_Fluoraz-FEPM-797.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Fluoraz FEPM 797 is a Perfluoroethylene Propylene Copolymer (FEP) product. It is available in North America. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.63 | g/cm³ | ASTM D297 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 83 | ASTM D785 | |
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction 1 | ASTM D1894 | ||
| vs. Itself - Dynamic | 0.50 | ||
| vs. Itself - Static | 0.80 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D1414 | ||
| 50% Strain | 3.86 | MPa | |
| 100% Strain | 9.14 | MPa | |
| Tensile Strength (Break) | 19.3 | MPa | ASTM D1414 |
| Tensile Elongation (Break) | 230 | % | ASTM D1414 |
| Tear Strength 2 | 55.2 | kN/m | ASTM D624 |
| Compression Set 3 | |||
| 23°C, 70 hr | 19 | % | ASTM D395 |
| 149°C, 70 hr | 36 | % | ASTM D395 |
| 175°C, 166 hr | 40 | % | ASTM D395 |
| 200°C, 22 hr | 27 | % | ASTM D395 |
| 200°C, 22 hr | 40 | % | ASTM D395B |
| 200°C, 70 hr | 34 | % | ASTM D395 |
| 232°C, 70 hr | 39 | % | ASTM D395 |
| 242°C, 70 hr | 22 | % | ASTM D395 |
| 288°C, 70 hr | 64 | % | ASTM D395 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | ASTM D573 | ||
| 149°C, 70 hr | 0.0 | % | |
| 232°C, 70 hr | -10 | % | |
| 276°C, 70 hr | -56 | % | |
| 288°C, 70 hr | -68 | % | |
| Change in Ultimate Elongation in Air | ASTM D573 | ||
| 149°C, 70 hr | 7.0 | % | |
| 232°C, 70 hr | 11 | % | |
| 276°C, 70 hr | 13 | % | |
| 288°C, 70 hr | -22 | % | |
| Change in Durometer Hardness in Air | ASTM D573 | ||
| 149°C, 70 hr | 2.0 | ||
| 232°C, 70 hr | -1.0 | ||
| 276°C, 70 hr | 0.0 | ||
| 288°C, 70 hr | -2.0 | ||
| Change in Tensile Strength | ASTM D471 | ||
| 135°C, 70 hr, in Ford ATF | -12 | % | |
| 135°C, 70 hr, in Wagner 21B | -14 | % | |
| 175°C, 70 hr, in Stauffer 7700 Fluid | -25 | % | |
| 200°C, 1000 hr, in Castrol 325 | -17 | % | |
| 240°C, 100 hr, in Castrol 325 | -22 | % | |
| 242°C, 70 hr, in Steam 4 | -44 | % | |
| Change in Ultimate Elongation | ASTM D471 | ||
| 135°C, 70 hr, in Ford ATF | 17 | % | |
| 135°C, 70 hr, in Wagner 21B | 24 | % | |
| 175°C, 70 hr, in Stauffer 7700 Fluid | 15 | % | |
| 200°C, 1000 hr, in Castrol 325 | 12 | % | |
| 240°C, 100 hr, in Castrol 325 | 25 | % | |
| 242°C, 70 hr, in Steam 5 | -32 | % | |
| Change in Durometer Hardness | ASTM D471 | ||
| 135°C, 70 hr, in Wagner 21B | -4.0 | ||
| 175°C, 70 hr, in Stauffer 7700 Fluid | -16 | ||
| 191°C, 70 hr, in Ford ATF | -7.0 | ||
| 200°C, 1000 hr, in Castrol 325 | -10 | ||
| 240°C, 100 hr, in Castrol 325 | -15 | ||
| 242°C, 70 hr, in Steam 6 | -2.0 | ||
| Change in Volume | ASTM D471 | ||
| 135°C, 70 hr, in Ford ATF | 8.0 | % | |
| 135°C, 70 hr, in Wagner 21B | 6.9 | % | |
| 175°C, 70 hr, in Stauffer 7700 Fluid | 25 | % | |
| 200°C, 1000 hr, in Castrol 325 | 10 | % | |
| 240°C, 100 hr, in Castrol 325 | 12 | % | |
| 242°C, 70 hr, in Steam 7 | 2.0 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 2.2E-4 | cm/cm/°C | ASTM E228 |
| Service Temperature | -5 to 232 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rubber Classification | FEPM | ASTM D1418 | |
| TR 10/50 | 6 | °C | ASTM D1329 |
| Note Message | |
|---|---|
| 1 . | Method C |
| 2 . | Die B |
| 3 . | In air, 25% of original deflection |
| 4 . | 500 psi |
| 5 . | 500 psi |
| 6 . | 500 psi |
| 7 . | 500 psi |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE CC253SL | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| Niche PPCT40BK | Niche Polymer, LLC | PP Copolymer | Niche |
| EPO-TEK® 730-110 Black | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| LUVOCOM® 1105-8000 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| POLYfill PPH T16040 | Polykemi AB | PP Homopolymer | POLYfill |
