Order Products : sales@su-jiao.com

Brush-On® 35

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Smooth-On, Inc
Trademark:	Brush-On®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	E58bev_Brush-On-35.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Smooth-On's Brush-On® Series of mold rubbers are extremely versatile and are famous for their abrasion resistance and high tear strength. They have the convenience of a one-to-one mix ratio and are easy to mix and apply with a brush or spatula. Brush-On® 35, 40, 50 & 60 paint onto vertical surfaces without sagging and will cure with negligible shrinkage to durable rubbers that perform and last in production. Each will capture exact detail from any original model. Brush-On® 35 is the softest of the series and offers the most flexibility and is used for models with deep undercuts. Brush-On® 35 & 40 can be inverted and used to make glove molds. Brush-On® 50 and Brush-On® 60 possess superior abrasion resistance and tear strength and are ideal for casting concrete and hard plasters in applications where less flexibility is required. These products are compatible. For example, you can apply two coats of Brush-On® 40 and back it up with two coats of Brush-On® 50 or 60. All three rubbers are suitable for reproducing sculpture, architectural restoration and production casting of concrete.

Message

Smooth-On's Brush-On® Series of mold rubbers are extremely versatile and are famous for their abrasion resistance and high tear strength. They have the convenience of a one-to-one mix ratio and are easy to mix and apply with a brush or spatula. Brush-On® 35, 40, 50 & 60 paint onto vertical surfaces without sagging and will cure with negligible shrinkage to durable rubbers that perform and last in production. Each will capture exact detail from any original model.

Brush-On® 35 is the softest of the series and offers the most flexibility and is used for models with deep undercuts. Brush-On® 35 & 40 can be inverted and used to make glove molds. Brush-On® 50 and Brush-On® 60 possess superior abrasion resistance and tear strength and are ideal for casting concrete and hard plasters in applications where less flexibility is required. These products are compatible. For example, you can apply two coats of Brush-On® 40 and back it up with two coats of Brush-On® 50 or 60. All three rubbers are suitable for reproducing sculpture, architectural restoration and production casting of concrete.

General Information
Features	Durable Good Abrasion Resistance Good Flexibility Good Tear Strength Low Shrinkage Soft
Appearance	Grey
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.29	g/cm³	ASTM D1475
Specific Volume	0.777	cm³/g
Viscosity	Brushable		ASTM D2393

Additional Information	Nominal Value	Unit
Mixing Ratio	100A:67B by weight 1A:1B by volume

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	< 0.10	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	35		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	2.31	MPa	ASTM D412
Tensile Elongation (Break)	1000	%	ASTM D412
Tear Strength ¹	9.98	kN/m	ASTM D624

Thermoset	Nominal Value	Unit
Pot Life	20	min
Demold Time	960	min

Note Message
1 .	Die C

Resin Grade	Manufacturer	Category	Trademark
SCHULAMID® 612 GF 30 HI	A. Schulman Europe	Nylon 612	SCHULAMID®
Shanghai Potomer SG3	Shanghai Potomer International Trade Co., Ltd.	PVC, Flexible	Shanghai Potomer
Selvol™ 15-103	Sekisui Chemical Company, Ltd.	PVOH	Selvol™
Ultraform® N 2644 Z9	BASF Corporation	Acetal (POM) Copolymer+PUR	Ultraform®
Yuyao PBT 4029G30	Yuyao Tenglong Plastics Co., Ltd.	PBT	Yuyao PBT