Order Products : sales@su-jiao.com
NuSil MED2-4420
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E3ooOf_NuSil-MED2-4420.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: LOW VISCOSITY, RAPID RTV CURE |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (200% Strain) | 0.689 | MPa |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.07 | g/cm³ | |
| Viscosity | |||
| -- 1 | 17 | Pa·s | |
| -- 2 | 20 | Pa·s | |
| Curing Time (150°C) | 0.25 | hr | |
| Pot Life (25°C) | 3.0 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 20 | ||
| Tensile Strength | 3.79 | MPa | |
| Tensile Elongation at Break | 480 | % |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumikon庐 EME-7331R | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| STYRON™ 478 | Americas Styrenics LLC | PS (HIPS) | STYRON™ |
| Hybrid S466 | Ravago Manufacturing Americas, LLC | PC+ABS | Hybrid |
| Kuraray Poval® PVA 117 | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |
| Polifil® PP T-2018 FDA | The Plastics Group | PP, Unspecified | Polifil® PP |
