Order Products : sales@su-jiao.com
Andur 8-6 APSLM
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E31znX_Andur-8-6-APSLM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8-6APSLM is a polyester based liquid, toluene diisocyanate terminated prepolymer designed to remain liquid at room temperature. Elastomers with a Shore A durometer hardness of 84-87 can be obtained when Andur 8-6APSLM is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be prepared by curing Andur 8-6APSLM with various polyols, combinations of polyols and Curene 442, other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity (100°C) | 1200 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 3.3 to 3.7% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP VLF 81309 | RTP Company | PPS | RTP |
| TECHNYL® A 303 NATURAL FA | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| ULTEM™ AUT210 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| ELASTOSIL® R plus 4001/30 | Wacker Chemie AG | Silicone | ELASTOSIL® R plus |
| OnColor™ ComPete™ F | PolyOne Corporation | Polyester, TP | OnColor™ ComPete™ |
