Order Products : sales@su-jiao.com
RheTech Polypropylene GC43P250-777
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | RheTech, Inc. |
| Trademark: | RheTech Polypropylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E1O5Yz_RheTech-Polypropylene-GC43P250-777.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 43% Glass Fiber Reinforced, Chemically Coupled, Polypropylene Copolymer, Ivory |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 89.6 | MPa | ASTM D638 |
| Flexural Modulus | 7580 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Dart Drop Impact | 0.339 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 159 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 146 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 - 82.2 | °C | |
| Drying Time | 1.0 - 2.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 210 - 238 | °C | |
| Middle Temperature | 216 - 243 | °C | |
| Front Temperature | 221 - 249 | °C | |
| Nozzle Temperature | 227 - 238 | °C | |
| Mold Temperature | 26.7 - 48.9 | °C | |
| Injection Pressure | 2.76 - 10.3 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Holding Pressure | 2.07 - 8.27 | MPa | |
| Back Pressure | 0.00 - 0.345 | MPa |
| Injection instructions |
|---|
| Injection Speed: slow to moderateScrew RPM: recovery 3 seconds before mold opensCycle Time: variable, wall thickness and size dependent |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RABALON® MJ6301C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| DOMAMID® 66S | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| Grilon® AS/2 | EMS-GRIVORY | Nylon 66 | Grilon® |
| Kepamid® 2325GVS | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
| Daelim Po1y® XP3300EN | DAELIM INDUSTRIAL CO., LTD. | mLLDPE | Daelim Po1y® |
