Order Products : sales@su-jiao.com

CLEARTUF TURBO II

Category:	PET , Polyethylene Terephthalate
Manufacturer:	M&G Gruppo Mossi & Ghisolfi
Trademark:	CLEARTUF
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DxAcQB_CLEARTUF-TURBO-II.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
CLEARTUF TURBO II Polyester Resin is a TPA-based polyethylene terephthalate copolymer resin specially designed for use in producing bottles for the mineral water market. It is a low molecular weight polymer with a 0.74 intrinsic viscosity (IV). CLEARTUF TURBO II Polyester Resin is designed to provide highly desirable container properties, including clarity, sparkle, and good color. CLEARTUF TURBO II Polyester Resin is designed with a special catalyst and stabilizer system that offers property retention during processing. This superior stability also enables use of the required drying conditions without affecting color or molecular weight. CLEARTUF TURBO II Polyester Resin also can be processed at lower temperatures compared to other typical bottle grades.

Message

CLEARTUF TURBO II Polyester Resin is a TPA-based polyethylene terephthalate copolymer resin specially designed for use in producing bottles for the mineral water market. It is a low molecular weight polymer with a 0.74 intrinsic viscosity (IV).
CLEARTUF TURBO II Polyester Resin is designed to provide highly desirable container properties, including clarity, sparkle, and good color. CLEARTUF TURBO II Polyester Resin is designed with a special catalyst and stabilizer system that offers property retention during processing. This superior stability also enables use of the required drying conditions without affecting color or molecular weight. CLEARTUF TURBO II Polyester Resin also can be processed at lower temperatures compared to other typical bottle grades.

General Information
Additive	Processing stabilizer
Features	Low molecular weight Copolymer Good processing stability Good coloring Definition, high
Uses	Bottle Container
Forms	Particle

Thermal	Nominal Value	Unit
Melting Temperature	248	°C

Additional Information
Intrinsic viscosity (I.V.), SMS 2867, +/- 0.02: 0.74 dl/gAcetaldehyde content, SMS 2791: 1.2 ppm Max.Colour (L* value), SMS 2789: 70 Min.Colour (b* value), SMS 2789: 0 Max.Melting point, SMS 2844: 248°CForeign particles, Visual Detection: None

Injection	Nominal Value	Unit
Drying Temperature - Desiccant Dryer	177	°C
Drying Time - Desiccant Dryer	4.0 - 6.0	hr
Dew Point - Desiccant Dryer	-29.0	°C
Suggested Max Moisture	3.0E-3	%
Processing (Melt) Temp	258 - 278	°C

Injection instructions
Blow molding processing temp: 90° to 105°C more than melting point

Resin Grade	Manufacturer	Category	Trademark
SCANAMID 66 A12^ F35	Polykemi AB	Nylon 66	SCANAMID 66
TECHNOGRAN® PPO GF FR BLK	Eurocompound Polymers	Polyolefin, Unspecified	TECHNOGRAN®
EZ-Spray® Foam	Smooth-On, Inc	Silicone	EZ-Spray®
FHR EPS 55-7455	Flint Hills Resources, LP	PS (EPS)	FHR EPS
POLYCOMPO PP J702LB	POLYCOMPO Co.,Ltd.	PP, Unspecified	POLYCOMPO PP