Order Products : sales@su-jiao.com
Shin-Etsu Elastomer KE-7021U
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Shin-Etsu Silicones of America |
| Trademark: | Shin-Etsu Elastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Dwh0Ra_Shin-Etsu-Elastomer-KE-7021U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
KE-7021 U is intended for applications where excellent high heat resistance is required.
Typical Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | 52 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 6.00 | MPa | |
| Tensile Elongation (Break) | 250 | % | |
| Tear Strength 1 | 9.81 | kN/m | |
| Compression Set (180°C, 22 hr) | 5.0 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Post Cure Time (200°C) | 4.0 | hr |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure Agent | DBPH | ||
| Press / Post Cure: Post |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® GM 20 R | Versalis S.p.A. | LDPE | Riblene® |
| RTP 301 LF | RTP Company | PC | RTP |
| TEREZ PA 6.6 7510 GF 50 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| NuSil MED-4780 | NuSil Technology | Rubber | NuSil |
| Apec® DP1-9354 | Covestro - Polycarbonates | PC | Apec® |
