Order Products : sales@su-jiao.com

Precision Polymer V61C

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Precision Polymer Engineering Ltd.
Trademark:	Precision Polymer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DtUoHR_Precision-Polymer-V61C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
V61C is a fluoroelastomer (FKM) material developed to offer increased efficiency and service life in low temperature applications. V61C extends the operational performance of FKM seals by a full 15°C lower than is possible with traditional FKM grades and sets a new industry benchmark in low temperature performance. V61C exhibits the same chemical and mechanical properties as conventional FKM grades and is available in almost any sized O-ring (standard and non -standard) and custom designed components. Key Attributes With a glass transition of -40°C (-40°F), V61C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold operating environments Seal applications that are exposed to cold situations Applications that demand high variations in temperature

Message

V61C is a fluoroelastomer (FKM) material developed to offer increased efficiency and service life in low temperature applications.

V61C extends the operational performance of FKM seals by a full 15°C lower than is possible with traditional FKM grades and sets a new industry benchmark in low temperature performance.

V61C exhibits the same chemical and mechanical properties as conventional FKM grades and is available in almost any sized O-ring (standard and non -standard) and custom designed components.

Key Attributes

With a glass transition of -40°C (-40°F), V61C offers the widest operating temperature range of -51°C to +225°C

Low compression set giving excellent seal performance

Good elongation properties making fitting easier even at low temperature

Excellent resistance to petroleum, oil, silicone and di-ester liquids

Typical Applications

Valves and pumps in cold operating environments

Seal applications that are exposed to cold situations

Applications that demand high variations in temperature

General Information
Features	Low compressive deformability Low temperature resistance Oil resistance
Uses	Pump parts Low temperature application Valve/valve components Seals
Appearance	Black

Hardness	Nominal Value		Test Method
IRHD Hardness	58		ASTM D1415, ISO 48

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	10.0	MPa	ASTM D412, ISO 37
Tensile Elongation (Break)	210	%	ASTM D412, ISO 37
Compression Set (200°C, 24 hr)	18	%	ASTM D395, ISO 815

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (250°C, 72 hr)	10	%	ASTM D412, ISO 37
Change in Ultimate Elongation in Air (250°C, 72 hr)	-1.5	%	ASTM D412, ISO 37
Change in IRHD Hardness in Air (250°C, 72 hr)	5.0		ASTM D573, ISO 188

Thermal	Nominal Value	Unit
Glass Transition Temperature	-40.0	°C
Maximum Operating Temperature	225	°C

Additional Information
Minimum Operating Temperature: -51°C (-60°F)

Resin Grade	Manufacturer	Category	Trademark
Qenos PE HD1090	Qenos Pty Ltd	HDPE	Qenos PE
WPP PE PE25-Black	Washington Penn Plastic Co. Inc.	MDPE	WPP PE
Hifax TKC 243X 3001	LyondellBasell Industries	PP Impact Copolymer	Hifax
PADMEX 56035	Pemex Petroquímica	HDPE	PADMEX
Polyrocks 3001APG30	Polyrocks Chemical Co., Ltd	PBT	Polyrocks