Order Products : sales@su-jiao.com
InvisiSil™ IVS4312
| Category: | Silicone , Silicone |
| Manufacturer: | Momentive Performance Materials Inc. |
| Trademark: | InvisiSil™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ds9FOx_InvisiSil-IVS4312.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
InvisiSil IVS4312 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer. Key Features and Benefits
Potential Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.990 | g/cm³ |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 3.3E-4 | cm/cm/°C |
| Optical | Nominal Value | ||
|---|---|---|---|
| Refractive Index | 1.410 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 1 | Clear/Transparent | ||
| -- 2 | Clear/Transparent | ||
| Viscosity | |||
| 23°C 3 | 0.80 | Pa·s | |
| 23°C 4 | 1.0 | Pa·s | |
| 23°C 5 | 1.2 | Pa·s | |
| Curing Time (150°C) | 1.0 | hr | |
| Pot Life (23°C) | 360 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 29 | ||
| Lap Shear Strength | 0.300 | MPa | |
| Tensile Strength | 0.800 | MPa | |
| Tensile Elongation at Break | 110 | % | |
| Electric Strength | 20 | kV/mm | |
| Relative Permittivity (60 Hz) | 2.80 | ||
| Volume Resistivity | 1.0E+15 | ohms·cm | |
| Dissipation Factor (60 Hz) | 1.0E-3 |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| 3 . | Part B |
| 4 . | After Mixing |
| 5 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VECTRA® E840i LDS | Celanese Corporation | LCP | VECTRA® |
| ABSCOM® SF1355 | Polymer Compounders Limited | ABS | ABSCOM® |
| Ad-Tech Epoxy EC-410 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Flontech® FT-GL5-M5-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| HIVOREX 5000S | Lotte Chemical Corporation | HDPE | HIVOREX |
