Order Products : sales@su-jiao.com
Pearlbond™ 12F75UV
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Pearlbond™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DrkHZ2_Pearlbond12F75UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Pearlbond™ 12F75UV is a UV-resistant standard polyester-based TPU supplied in form of translucent, colourless pellets, featuring a low melting point and very low gel content. Processed by extrusion and compounding. APPLICATIONS Pearlbond™ 12F75UV is designed for a wide variety of adhesive film applications requiring excellent adhesion in combination with good heat resistance and dry cleaning resistance. This grade can be both cast extruded and blown. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.15 | g/cm³ | ASTM D792 |
| 20°C | 1.15 | g/cm³ | ISO 2781 |
| Melt Mass-Flow Rate (MFR) (190°C/10.0 kg) | 40 - 65 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 78 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| -- | 30.0 | MPa | ISO 527-2 |
| 100% strain | 4.00 | MPa | ISO 527-2 |
| 300% strain | 7.00 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 530 | % | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 4.00 | MPa | ASTM D412 |
| 300% strain | 7.00 | MPa | ASTM D412 |
| Tensile Strength | 30.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 530 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 130 - 140 | °C | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Softening Range | 110 - 130 | °C | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Extruder Screw L/D Ratio | 25.0:1.0 to 30.0:1.0 | ||
| Extruder Screw Compression Ratio | 2.0:1.0 to 3.0:1.0 | ||
| Drying Temperature | 90 - 105 | °C | |
| Drying Time | 1.0 - 2.0 | hr | |
| Cylinder Zone 1 Temp. | 145 - 155 | °C | |
| Cylinder Zone 2 Temp. | 155 - 165 | °C | |
| Cylinder Zone 3 Temp. | 165 - 170 | °C | |
| Cylinder Zone 4 Temp. | 170 - 180 | °C | |
| Die Temperature | 170 - 180 | °C |
| Note Message | |
|---|---|
| 1 . | 20°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ECONAMID® 66FLST2 | DOMO Engineering Plastics SPA | Nylon 66 | ECONAMID® |
| Hylon® N2243HL | Ravago Manufacturing Americas, LLC | Nylon 6 | Hylon® |
| Jackdaw PP ES10NT6472 | Jackdaw Polymers | PP, Unspecified | Jackdaw PP |
| LNP™ VERTON™ MV006S compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ VERTON™ |
| Neoflex™ 7065 | Zylog Plastalloys Pvt. Ltd. | TPE | Neoflex™ |
