Order Products : sales@su-jiao.com
Advanced Composites ATX-969
| Category: | TPO , Compounded Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Drh9qg_Advanced-Composites-ATX-969.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High Performance, Scratch Resistant TPO for Seamless Airbag Applications Approved to Chrysler MS-DC265, Type D Specification |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.02 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 50 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 24.2 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 110 | % | ISO 527-2 |
| Flexural Modulus | 1970 | MPa | ISO 178 |
| Scratch Resistance | > 15 | N | FLTM BN108-13 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180/A | ||
| -40°C | 7.6 | kJ/m² | ISO 180/A |
| 23°C | 53 | kJ/m² | ISO 180/A |
| Instrumented Dart Impact (0°C, Total Energy, Ductile Failure) | 31.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 128 | °C | ISO 75-2/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 193 - 210 | °C | |
| Middle Temperature | 216 | °C | |
| Front Temperature | 216 | °C | |
| Nozzle Temperature | 210 | °C | |
| Processing (Melt) Temp | 199 - 249 | °C | |
| Mold Temperature | 48.9 - 60.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 50 to 60% of machine capacityScrew RPM: 1 to 2 secs before mold open |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PPX-GP3-IM | Polymer Resources Ltd. | PPE+PS | PRL |
| RTP 1005 SI .5 | RTP Company | PBT | RTP |
| Vi-Chem PVC VIR 6186 | Vi-Chem Corporation | PVC, Rigid | Vi-Chem PVC |
| PolyCal™ LC | Heritage Plastics, Inc. | LLDPE | PolyCal™ |
| Sylvin 9812-82 BLACK 232 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
