Order Products : sales@su-jiao.com
Wanthane® WHT-1298
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Wanhua Chemical Group Co., Ltd. |
| Trademark: | Wanthane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DrT7dN_Wanthane-WHT-1298.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WHT-1298 is economical polyester-based TPU for injection molding applications, supplied in form of transparent, translucent, colorless or slightly yellowish pellets with good strength resilience Applications: Heels, Injection part. etc |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 98 | ||
| Shore D | 59 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 60.0 | mm³ | ISO 4649 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 16.0 | MPa | |
| 300% Strain | 22.0 | MPa | |
| Tensile Strength | 35.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 410 | % | ASTM D412 |
| Tear Strength | 160 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Rear Temperature | 200 | °C | |
| Middle Temperature | 205 | °C | |
| Front Temperature | 210 | °C | |
| Nozzle Temperature | 215 | °C | |
| Injection Pressure | 70.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsamid® AMNO MED | Arkema | Nylon 12 | Rilsamid® |
| NYCOA Polyamide 2011 | Nycoa (Nylon Corporation of America) | Nylon+TPE | NYCOA Polyamide |
| ALCOM® PC 740/2566 PTFE20 | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| CP PRYME® Polycarbonate PC100R | Chase Plastics Services Inc. | PC | CP PRYME® Polycarbonate |
| LUVOCOM® 1105-7106 VP | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
