Order Products : sales@su-jiao.com
Ingeo™ 6060D
| Category: | PLA , Polylactic Acid |
| Manufacturer: | NatureWorks® LLC |
| Trademark: | Ingeo™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Dr5DRG_Ingeo-6060D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ingeo biopolymer 6060D, a NatureWorks product, is an amorphous thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6060D is designed for extrusion into mechanically drawn staple fibers using conventional fiber spinning and drawing equipment. Ingeo biopolymer 6060D can be used as a low melt binder polymer in a sheath-core configuration. Potential applications for Ingeo biopolymer 6060D include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 8.0 to 10 | g/10 min | ASTM D1238 |
| Relative Viscosity | 3.30 | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Denier - per filament | > 4.00 | ||
| Elongation of Fibers | 50 | % | ASTM D2256 |
| Tenacity of Fibers | 3.50 | g/denier | ASTM D2256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 55.0 to 60.0 | °C | ASTM D3417 |
| Peak Crystallization Temperature (DSC) | 125 to 135 | °C | ASTM D3418 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Density (230°C) | 1.08 | g/cm³ |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 | °C | |
| Drying Time | 8.0 to 12 | hr | |
| Suggested Max Moisture | < 5.0E-3 | % | |
| Melt Temperature | 220 to 240 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LLDPE 6118NE | Saudi Basic Industries Corporation (SABIC) | LLDPE | SABIC® LLDPE |
| Small Boss RPVC002 | Tongxiang Small Boss Special Plastic Products Co., Ltd. | PVC, Rigid | Small Boss |
| YUZEX® 3300 | SK Global Chemical | HDPE | YUZEX® |
| NEXT PCR PA6 MG 100PCR | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT PCR |
| EPO-TEK® T7109-18 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
