Order Products : sales@su-jiao.com
AXLENE® 12
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | INDELPRO, S.A. de C.V. |
| Trademark: | AXLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DoTkXc_AXLENE12.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AXLENE12 is a homopolymer of propylene for general purposes; it is designed for injection machines. The base resin in this product meets the requirements of the US Food and Drug Administration (FDA) contained in the Code of Federal Regulations in 21 CFR 177.1520. Features:
Typical Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792A |
| Melt Mass-Flow Rate (MFR) | 12 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 10 | % | ASTM D638 |
| Flexural Modulus | 1300 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 33 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 103 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Techsil RTV2410 | Techsil Limited | Silicone | Techsil |
| Bergamid™ B70 G20 U BK037 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| HONES® PA66 G25 | Guangdong Shunde Hones Polymer Material Co., Ltd. | Nylon 66 | HONES® |
| KOPA® KN178MT40 | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| ISOPAK® 525GF17 | Great Eastern Resins Industrial Co., Ltd. (GRECO) | ABS | ISOPAK® |
