Order Products : sales@su-jiao.com

Bapolene® HD3292

Category:	HDPE , High Density Polyethylene
Manufacturer:	Bamberger Polymers, Inc.
Trademark:	Bapolene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DoNzhk_Bapolene-HD3292.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Narrow molecular weight distribution injection molding resin. This high flow resin allows fast injection cycles and provides good impact strength, rigidity, and warpage resistance. This product meets FDA standards for food contact applications.

General Information
Features	Fast Molding Cycle Food Contact Acceptable Good Impact Resistance High Flow Medium Rigidity Narrow Molecular Weight Distribution Warp Resistant
Uses	Food Containers Thin-walled Containers
Agency Ratings	FDA Food Contact, Unspecified Rating
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.952	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	40	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	22.4	MPa	ASTM D638
Tensile Elongation ²(Break)	170	%	ASTM D638
Flexural Modulus - Tangent ³	1310	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	32	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	78.0	°C	ASTM D648
Vicat Softening Temperature	121	°C	ASTM D1525

Injection	Nominal Value	Unit
Processing (Melt) Temp	170 to 230	°C

Note Message
1 .	20 mm/min
2 .	20 mm/min
3 .	Method I (3 point load)

Resin Grade	Manufacturer	Category	Trademark
Zytel® E51HSB NC010	DuPont Performance Polymers	Nylon 66	Zytel®
Nylene® 5143 HS	Custom Resins Group	Nylon 66	Nylene®
AMTOPP TL22	Inteplast Group	PP, Unspecified	AMTOPP
OmniLon™ PA6/6 S12 FD	OMNI Plastics, LLC	Nylon 66	OmniLon™
VisiJet® FTX Gray	3D Systems	Unspecified	VisiJet®