Order Products : sales@su-jiao.com

ISPLEN® PP 084 D2M

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DlGESN_ISPLEN-PP-084-D2M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PP 084 D2M is a polypropylene homopolymer of high fluidity for injection moulding. It is specifically intended for applications that require end articles with very low surface friction. The grade is characterised by excellent flow properties that facilitates an easy mould filling as well as a quick release from the mould. Articles produced with this grade have good physical properties, excellent chemical resistance and easy printability. TYPICAL APPLICATIONS ISPLEN® PP 084 D2M has been specifically designed for the production of articles that need short cycles times, easy handling and low resistance during manipulation in automatic or robotized production lines, such us: Caps and closures Screw caps Components for spray dispensers. Pistons for one use syringes, needle covers and other lab equipment (tubes, pipettes...). Garden furniture. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PP 084 D2M is a polypropylene homopolymer of high fluidity for injection moulding. It is specifically intended for applications that require end articles with very low surface friction. The grade is characterised by excellent flow properties that facilitates an easy mould filling as well as a quick release from the mould. Articles produced with this grade have good physical properties, excellent chemical resistance and easy printability.

TYPICAL APPLICATIONS
ISPLEN® PP 084 D2M has been specifically designed for the production of articles that need short cycles times, easy handling and low resistance during manipulation in automatic or robotized production lines, such us:

Caps and closures

Screw caps

Components for spray dispensers.

Pistons for one use syringes, needle covers and other lab equipment (tubes, pipettes...).

Garden furniture.

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Features	Excellent Printability Fast Molding Cycle Food Contact Acceptable Good Chemical Resistance High Flow Low Friction
Uses	Caps Closures Furniture Labware
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	20	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	72		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1600	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	3.0	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	85.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
Maxelast® C4935	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
RTP 6001-70A Z	RTP Company	TPE	RTP
EPOPLEN PP CFR 10 NC	EPSAN Plastik SAN. ve TiC. A.S.	PP, Unspecified	EPOPLEN
Hapflex™ 870-4	Hapco Inc.	TP, Unspecified	Hapflex™
NYLOY® GT-0010N 20N1	Nytex Composites Co., Ltd.	PLA	NYLOY®