Order Products : sales@su-jiao.com
HiFill® PA6 GF50 IM2 L
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Techmer Engineered Solutions |
| Trademark: | HiFill® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DkcN1K_HiFill-PA6-GF50-IM2-L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HiFill® PA6 GF50 IM2 L is a Polyamide 6 (Nylon 6) product filled with 50% glass fiber. It can be processed by injection molding and is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.55 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.20 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 0.65 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 121 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength (Break) | 172 | 152 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.8 | 3.8 | % | ASTM D638 |
| Flexural Modulus | 9310 | 6890 | MPa | ASTM D790 |
| Flexural Strength | 241 | 221 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 370 | 480 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | No Break | No Break | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 218 | -- | °C | |
| 1.8 MPa, Unannealed | 213 | -- | °C | |
| CLTE - Flow | 1.4E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | -- | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | 18 | -- | kV/mm | ASTM D149 |
| Additional Information | Dry | Conditioned | ||
|---|---|---|---|---|
| TPCI # | 1053102 | -- |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 260 to 304 | °C | |
| Middle Temperature | 260 to 304 | °C | |
| Front Temperature | 260 to 304 | °C | |
| Processing (Melt) Temp | 243 to 271 | °C | |
| Mold Temperature | 65.6 to 93.3 | °C | |
| Back Pressure | 0.00 to 0.345 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex AN2720SB | Ginar Technology Co., LTD. | Nylon 66 | Mapex |
| Star L PA66 D91 | Eurostar Engineering Plastics | Nylon 66 | Star L |
| VAMPORAN 0024 V0 13 | Vamp Tech | PPE+PS | VAMPORAN |
| HI-ZEX™ 530E | Prime Polymer Co., Ltd. | HDPE | HI-ZEX™ |
| Huafon JF-S-AH8100 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
