Order Products : sales@su-jiao.com
Osterlene® LD-1.8-921
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DkbTmt_Osterlene-LD-1-8-921.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LD-1.8-921 is a series of homopolymer resins that combine premium clarity with strength and stiffness. LD-1.8-921 exhibits good impact strength on both flat and creased film. It is recommended for textile packaging, light produce, bread bags and other thin packaging films enhanced by clarity and sparkle. The optical values of LD-1.8-921 actually improve with decreases in film gauge and are maintained at wide die gap settings. This leads to important cost savings. With wider die gaps back pressures are reduced, as are extrusion costs. LD-1.8-921 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - 1% Secant, MD | 179 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| TD : Yield | 11.0 | MPa | ASTM D882 |
| MD : Fracture | 27.6 | MPa | ASTM D882 |
| Tensile Elongation - MD (Yield) | 300 | % | ASTM D882 |
| Dart Drop Impact 1(10°C) | 90 | g | ASTM D1709 |
| Elmendorf Tear Strength - MD | 360 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 70 | ASTM D2457 | |
| Haze | 5.0 | % | ASTM D1003 |
| Additional Information |
|---|
| Product LD-1.8-921: Slip - None, Antiblock - NoneProduct LD-1.8-921-AH: Slip - None, Antiblock - HighProduct LD-1.8-921-SMAM: Slip - Medium, Antiblock - Medium |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 803 TFE 5 | RTP Company | Acetal (POM) Copolymer | RTP |
| SOLARENE F644 | Dongbu Hannong Chemical | PS (GPPS) | SOLARENE |
| ACRYLITE® Optical SuPure® 8N | Evonik Cyro LLC | Acrylic (PMMA) | ACRYLITE® Optical SuPure® |
| Jiangsu Meilan XXMLF3-11 | Jiangsu Meilan Chemical Co., Ltd. | Fluorelastomer | Jiangsu Meilan |
| Axiall PVC 3291 | Axiall Corporation | PVC, Rigid | Axiall PVC |
