Order Products : sales@su-jiao.com
Salflex 260EI
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Salflex Polymers Ltd. |
| Trademark: | Salflex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Di2eVX_Salflex-260EI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Salflex 260EI is a Thermoplastic Polyolefin Elastomer (TPO (POE)) product. It can be processed by injection molding and is available in North America. Typical application: Automotive. Primary characteristic: impact resistant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.5 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.5 to 1.7 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 55 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 710 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 13.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 470 | % | ISO 37 |
| Tear Strength 1 | 120 | kN/m | ISO 34-1 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | No Break | ISO 180/1A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 75.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 190 to 220 | °C | |
| Middle Temperature | 200 to 230 | °C | |
| Front Temperature | 210 to 240 | °C | |
| Nozzle Temperature | 210 to 240 | °C | |
| Processing (Melt) Temp | 200 to 220 | °C | |
| Mold Temperature | 27.0 to 60.0 | °C |
| Note Message | |
|---|---|
| 1 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unilex™ UP.2000.952 | United Polychem | HDPE | Unilex™ |
| NYCOA Polyamide 446 | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| Baytec® WE-180 | Covestro - PUR | PUR-Ether/MDI | Baytec® |
| Greenflex® MQ 40 | Versalis S.p.A. | EVA | Greenflex® |
| LNP™ LUBRICOMP™ LCL36E compound | SABIC Innovative Plastics Europe | PEEK | LNP™ LUBRICOMP™ |
