Dryflex® A3 500600

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	ELASTO
Trademark:	Dryflex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DgwOv6_Dryflex-A3-500600.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Dryflex A thermoplastic elastomer (TPE) bondable grades, primarily based on SBS and SEBS, increase freedom of design and open up a vast range of application opportunities. It used to be a complex and costly affair producing details made of thermoplastics that showed soft-touch qualities or had integrated seals. With Dryflex A TPEs, since the materials are bonded together at the production stage, no separate primer or adhesive is needed. This makes the process faster and more cost-effective than if the two parts were assembled together after each had been produced separately, or bonded mechanically, which often requires some modification to the design. Primarily a TPE is used as the soft component. Dryflex A bondable grades can be co-extruded or overmoulded with a variety of engineering plastics. Dryflex A grades are available in black or natural and can easily be coloured. These thermoplastic elastomers form excellent bonds onto PP, PE, PA, ABS, PC, PS, PMMA, ASA, SAN and their blends. Polyamides and ABS may be either reinforced or non-reinforced yet still bond extremely well to Dryflex. It is easy to achieve excellent bonding to PP, even using standard TPE materials, while other thermoplastics require some modification of the TPE material to optimise bonding.

Message

Dryflex A thermoplastic elastomer (TPE) bondable grades, primarily based on SBS and SEBS, increase freedom of design and open up a vast range of application opportunities.

It used to be a complex and costly affair producing details made of thermoplastics that showed soft-touch qualities or had integrated seals. With Dryflex A TPEs, since the materials are bonded together at the production stage, no separate primer or adhesive is needed. This makes the process faster and more cost-effective than if the two parts were assembled together after each had been produced separately, or bonded mechanically, which often requires some modification to the design.

Primarily a TPE is used as the soft component. Dryflex A bondable grades can be co-extruded or overmoulded with a variety of engineering plastics.

Dryflex A grades are available in black or natural and can easily be coloured. These thermoplastic elastomers form excellent bonds onto PP, PE, PA, ABS, PC, PS, PMMA, ASA, SAN and their blends. Polyamides and ABS may be either reinforced or non-reinforced yet still bond extremely well to Dryflex. It is easy to achieve excellent bonding to PP, even using standard TPE materials, while other thermoplastics require some modification of the TPE material to optimise bonding.

General Information
Features	Adhesiveness Good chemical resistance Good weather resistance
Appearance	Black Available colors Natural color
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.890	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 4.00 mm)	60		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
--	7.00	MPa	ASTM D638
100% strain	1.60	MPa	ASTM D638
300% strain	2.70	MPa	ASTM D638
Tensile Elongation (Break)	700	%	ASTM D638

Elastomers	Nominal Value	Unit	Test Method
Tear Strength	27.0	kN/m	ASTM D624

Thermal	Nominal Value	Unit
Service Temperature	-50 - 125	°C

Additional Information	Nominal Value	Unit	Test Method
Peel Force ¹	3.5 - 4.0	kN/m	ASTM D903
Processing Melt Temperature: 190 to 220°C

Note Message
1 .	Tests conducted on overmoulded test specimens, 2.5mm thick with a 90° peel angle

Resin Grade	Manufacturer	Category	Trademark
RTP 1102 FR	RTP Company	PET	RTP
SLOVAMID® 66 OB	Plastcom	Nylon 66	SLOVAMID® 66
APICAL 150AF019	Kaneka Corporation	Film, PI	APICAL
EL-Lene™ H511W	SCG Chemicals Co., Ltd.	HDPE	EL-Lene™
Petrothene® LP540200	LyondellBasell Industries	HDPE Copolymer	Petrothene®