Order Products : sales@su-jiao.com
Hylex® P1303L2 HB
| Category: | PC , Polycarbonate |
| Manufacturer: | Entec Polymers |
| Trademark: | Hylex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Dgid3D_HylexP1303L2HB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCARBONATE, UV STABILIZED, LOW MELT FLOW, MOLD RELEASE |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 2.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 61.0 | MPa | ASTM D638 |
| Fracture, 23°C | 57.9 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 23°C | 6.0 | % | ASTM D638 |
| Fracture, 23°C | 96 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2330 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 96.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 810 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 131 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 LI LS | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Celstran庐 POM-GF35-04 AF3001 | Celanese Corporation | Acetal (POM) Copolymer | Celstran® |
| GLAMIDE® TY-791HT | TOYOBO America, Inc. | Nylon 6 | GLAMIDE® |
| Plasmer 1075N/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| Sylvin 7844-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
