Order Products : sales@su-jiao.com
Tecolen® CP20 MF20 NL XC30
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Eurotec Engineering Plastics |
| Trademark: | Tecolen® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DfS4w9_Tecolen-CP20-MF20-NL-XC30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPCP, 20% mineral filled, flame retardant - halogen (RoHS compliant), heat stabilized, natural |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.09 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2250 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 25.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 40 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180/1A | ||
| -30°C | 3.5 | kJ/m² | |
| 23°C | 10 | kJ/m² | |
| Unnotched Izod Impact Strength (23°C) | 75 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 55.0 | °C | ISO 75-2/A |
| Melting Temperature 1 | 160 to 165 | °C | ISO 11357-3 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | V-2 | ||
| 1.60 mm | V-2 | ||
| Glow Wire Flammability Index (2.00 mm) | 850 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (2.00 mm) | 775 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 60.0 | °C | |
| Processing (Melt) Temp | 200 to 240 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Holding Pressure | 40.0 to 80.0 | MPa | |
| Back Pressure | Low |
| Note Message | |
|---|---|
| 1 . | 10 K/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer KE-571U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Sylvin 2910-75 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Hifax ERC 2014P C1V301 | LyondellBasell Industries | PP Copolymer | Hifax |
| Lifoflex® UV FLAM 50700 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
| Hostacom CR 250 F/M C11462 | LyondellBasell Industries | PP Copolymer | Hostacom |
