Order Products : sales@su-jiao.com
Adell PC YS-10
| Category: | PC Alloy , Polycarbonate Alloy |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DfC3nf_Adell-PC-YS-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adell PC YS-10 is a Polycarbonate Alloy (PC Alloy) material. It is available in North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.20 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 70 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 62.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 150 | % | ASTM D638 |
| Flexural Modulus | 2170 | MPa | ASTM D790 |
| Flexural Strength | 77.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 750 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 138 | °C | |
| 1.8 MPa, Unannealed | 123 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ BL-818.H001-8016 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| Plaslube® PES GF30 TL15 | Techmer Engineered Solutions | PESU | Plaslube® |
| PLASTRON™ PA66-GF50-01 | Daicel Polymer Ltd. | Nylon 66 | PLASTRON™ |
| Sylvin 9915-85 NATURAL | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 9604-90 Grey 9614 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
