Order Products : sales@su-jiao.com
InnoTooling™ IE-9070
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | InnoTooling™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Df5zSz_InnoTooling-IE-9070.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IE-9070 is a slow reacting polyurethane formulated for room temperature hand mix dispensing methods. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. This product is especially developed for translucent mass castings. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| Cured | 1.07 | g/cm³ | |
| Hardener | 1.07 | g/cm³ | |
| Base Resin | 1.07 | g/cm³ | |
| Molding Shrinkage - Flow | 0.10 to 0.50 | % | ASTM D2566 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 20 Mix Ratio by Weight: 20 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Demold Time | 240 to 480 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 0.19 | Pa·s | |
| 25°C 2 | 2.4 | Pa·s | |
| 25°C 3 | 6.5 | Pa·s | |
| Curing Time 4 | 40 | hr | |
| Gel Time | 15 to 25 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 65 to 75 | ASTM D2240 | |
| Tensile Strength | 5.52 | MPa | ASTM D638 |
| Tensile Elongation at Break | 300 | % | ASTM D638 |
| Tear Strength | 17.5 | kN/m | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Mixed |
| 3 . | Resin |
| 4 . | 24 hours at 77°F + 16 hours at 150°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® HDM 510 | Marco Polo International, Inc. | HDPE | MARPOL® |
| RTP 1501-40D | RTP Company | TPE | RTP |
| Mirakutoran® TPU P890 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Hapflex™ 1021 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| LNP™ LUBRICOMP™ DL002ER compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
