Order Products : sales@su-jiao.com
Rilsan® BESHV BLK T
| Category: | Nylon 11 , Polyamide 11 |
| Manufacturer: | Arkema |
| Trademark: | Rilsan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DeWTMb_Rilsan-BESHV-BLK-T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Rilsan® BESHV BLK T is an ultra high viscosity Polyamide 11 grade specifically designed to be extruded into large diameter thick wall pipe. This grade has been specifically engineered to achieve an outstanding balance of properties for Oil & Gas piping applications. It offers a cost effective system for non-metallic corrosion free fluid transfer in critical Oil and Gas industry applications. Rilsan® Polyamide 11 is the only thermoplastic material permitted by the US Department of Transportation (DOT) under the Code of Federal Regulations (CFR) Title 49, Part 192, for gas distribution piping to be installed and operated at pressures up to and including 200 psi in a design factor of 0.40 MAIN APPLICATIONS
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.03 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ISO 868 | ||
| Shaw D | 77 | ISO 868 | |
| Shaw D, 15 seconds | 72 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1390 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Yield | 42.0 | MPa | ISO 527-2 |
| Fracture | 52.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | ||
| Yield | 5.0 | % | ISO 527-2 |
| Fracture | > 200 | % | ISO 527-2 |
| Flexural Modulus | 1180 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | 11 | kJ/m² | ISO 179 |
| 23°C | 10 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -30°C | No Break | ISO 179 | |
| 23°C | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 189 | °C | ISO 11357-3 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ASTM Classification | PA0320 B32300 | ASTM D4066 | |
| Renewable Carbon Conent | > 95 | % | ASTM D6866 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 176 | °C | |
| Drying Time | 12 | hr | |
| Processing (Melt) Temp | 240 - 290 | °C | |
| Mold Temperature | 20.0 - 60.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E790PNAT | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| InnoPlus LL7410D2 | PTT Global Chemical Public Company Limited | LLDPE | InnoPlus |
| MAJORIS ET311 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
| Sylvin 916VO-95 Green 3108 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 9067-90 GREY 9193 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
