Monprene® RG-20170 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
The Monprene RG-20100 series is a group of high performance thermoplastic elastomers specifically designed for extruded regulated applications including food contact, toys, and children's products. Monprene RG-20170 is a low density, medium hardness grade that complies with various US FDA and European regulations and directives for food contact and toy safety and is suitable for extrusion. Please contact Teknor Apex for a regulatory compliance letter.

General Information
Features	Low Specific Gravity Without Fillers Low density smoothness Workability, good Good coloring Good adhesion Low liquidity Lubrication Compliance of Food Exposure BPA-free No kinetic components Medium hardness
Uses	Cosmetic Packaging Kitchen utensils Non-specific food applications Cover Food packaging Food service sector Food container Toys Rubber substitution Consumer goods application field
Agency Ratings	FDA Food Exposure, Not Rated European food contact, not rated
RoHS Compliance	RoHS compliance
Appearance	Translucent Available colors
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.890	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	3.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 5 sec)	70		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (Break)	11.4	MPa	ISO 37
Tensile Elongation (Break)	750	%	ISO 37

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	149 - 160	°C
Cylinder Zone 2 Temp.	160 - 204	°C
Cylinder Zone 3 Temp.	171 - 216	°C
Cylinder Zone 4 Temp.	182 - 227	°C
Die Temperature	182 - 227	°C

Extrusion instructions
Screw Speed: 30 to 100 rpmDrying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150F (65C).

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DeCL6I_MonpreneRG20170PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Braskem PP 5E16S	Braskem America Inc.	PP Homopolymer	Braskem PP
Daelim Po1y® LH-4100SK	DAELIM INDUSTRIAL CO., LTD.	HDPE	Daelim Po1y®
Lupoy® 1301-22	LG Chem Ltd.	PC	Lupoy®
Telcar® TL-88-N873F	Teknor Apex Company	TPE	Telcar®
ALTECH® PA6 A 3030/220 GB30 UV	ALBIS PLASTIC GmbH	Nylon 6	ALTECH® PA6