Order Products : sales@su-jiao.com
Braskem PE LF321FC
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DaaggV_BraskemPELF321FC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LF321FC is a Linear Low Density Polyethylene produced by gas phase process, specially developed for XLPE silane cross-linking in monosil process, to use in insulation and jacketing for low voltage wires and cables. This product contains suitable additives, low oligomer rate and very low gel content. Applications: Recommended to cross-linking monosil process, to insulation and jacketing for low voltage XLPE wires and cables. Process: The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee. The optimum processing conditions are 170 - 210°C. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.7 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00mm, 100% Igepal, molded) | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 23.9 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 2000 | % | ASTM D638 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 41 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 2.20 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 3.0E-4 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® RP 3501-C | Plastic Solutions, Inc. | PP Random Copolymer | PrimaFlex® |
| Royalite R84/21 | Spartech Plastics | PMMA+PVC | Royalite |
| Starpylen MFB44S | Eurostar Engineering Plastics | PP, Unspecified | Starpylen |
| Chiao Fu PA66 MD212G13 NAT | Chiao Fu Enterprises Co., Ltd. | Nylon 66 | Chiao Fu PA66 |
| ESTOPLAST ZK 6002NN05 | Ester Industries Ltd. | PC | ESTOPLAST ZK |
