Order Products : sales@su-jiao.com
APEX® 4020
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Company |
| Trademark: | APEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DZWe7F_APEX-4020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
APEX®4020 is a flexible polyvinyl chloride material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. APEX®The main features of the 4020 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Wire Types |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 - 1.2 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore C, 10 sec) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 17.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 150 | % | ASTM D638 |
| Flexural Modulus | 200 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | -5.00 | °C | ASTM D794 |
| Brittleness Temperature | -5.00 | °C | ASTM D746 |
| RTI Elec | UL 746 | ||
| 0.810 mm | 90.0 | °C | UL 746 |
| 3.00 mm | 90.0 | °C | UL 746 |
| RTI | UL 746 | ||
| 0.810 mm | 90.0 | °C | UL 746 |
| 3.00 mm | 90.0 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (CTI) (3.00 mm) | PLC 0 | UL 746 | |
| High Amp Arc Ignition (HAI) (3.00 mm) | PLC 2 | UL 746 | |
| Hot-wire Ignition (HWI) (3.00 mm) | PLC 1 | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.810 mm | V-0 | UL 94 | |
| 3.00 mm | V-0 | UL 94 | |
| Oxygen Index | 31 | % | ASTM D2863 |
| Additional Information |
|---|
| Temperature Rating: 60 °CRecognized Component, CSA C22.2 No. 0.6, CSA Flammability Classification: 0.6V-0 @ 0.84 mm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 193 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CP PRYME® Polyethylene PE100LLD-50M | Chase Plastics Services Inc. | LLDPE | CP PRYME® Polyethylene |
| Diakon® ST35G8 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| INNOPOL® PP CS 1-3120 MA | Inno-Comp Ltd. | PP Homopolymer | INNOPOL® PP |
| Edgetek™ PC-20GF/000 OOV GRAY #4 | PolyOne Corporation | PC | Edgetek™ |
| FUDOWLITE® F5770F | Fudow Co., Ltd. | Phenolic | FUDOWLITE® |
