Order Products : sales@su-jiao.com
CERTENE™ PRM-35C
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DXmGMK_CERTENE-PRM-35C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRM-35C is a certified prime grade Clarified Injection Molding copolymer specially designed for thin-walled applications requiring outstanding clarity and good impact resistance. PRM-35C exhibits high flow rate, very good processability, high speed mold filling, fast cycle time, very good dimensional stability, low blooming, and good balance of mechanical properties. PRM-35C typical applications include high quality consumer articles, thin-wall high gloss rigid packaging, and high quality housewares where high clarity is a key requirement. PRM-35C complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 93 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 27.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1020 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 64 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 82.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 134 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® 75-9351A-85 | Teknor Apex Company | PVC, Flexible | APEX® |
| Eastobond™ 19411 | Eastman Chemical Company | Copolyester | Eastobond™ |
| GAPEX® RPP20EB92BK | Ferro Corporation | PP, Unspecified | GAPEX® |
| Halene P M310 | Haldia Petrochemicals Ltd. | PP Impact Copolymer | Halene P |
| TECHNYL® A 218 V33 BLACK 51 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
