Order Products : sales@su-jiao.com
AXLENE® 20
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | INDELPRO, S.A. de C.V. |
| Trademark: | AXLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DWYgYQ_AXLENE20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AXLENE20 is a homopolymer that is designed for screw-injection molding. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features:
Typical Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792A |
| Melt Mass-Flow Rate (MFR) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 34.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 9.7 | % | ASTM D638 |
| Flexural Modulus | 1330 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 25 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultraform® S 2320 0035 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| BP RPP 4010 T NAT | Buckeye Polymers, Inc. | PP, Unspecified | BP |
| Ebalta GH 706 / GL | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
| Elastron® D D300.A80.B | Elastron USA, Inc. | SBS | Elastron® D |
| Hyflon® AD 40H | Solvay Specialty Polymers | Perfluoropolymer | Hyflon® AD |
