Order Products : sales@su-jiao.com
Halene P F103
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DUyRsk_Halene-P-F103.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
F103 is a Polypropylene Homopolymer, produced by the latest generation Spheripol Technology. This is an Extrusion grade primarily suitable for Monolayer or Coextruded Biaxially Oriented Polypropylene films (BOPP). F103 is designed to provide a very stable extrusion on stenter lines & to give low water carryover, excellent thickness control & increased drawability. BOPP films produced from F103 possess excellent Clarity, Gloss, Mechanical Strengths, high Impact & Puncture Resistance & barrier to Moisture, Aroma, Fats & Oils. Product produced from F103 is suitable for Food Contact application. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.3 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 34.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1450 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 40 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 95.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 230 - 280 | °C | |
| Cylinder Zone 2 Temp. | 230 - 280 | °C | |
| Cylinder Zone 3 Temp. | 230 - 280 | °C | |
| Cylinder Zone 4 Temp. | 230 - 280 | °C | |
| Cylinder Zone 5 Temp. | 230 - 280 | °C |
| Extrusion instructions |
|---|
| Water Bath Temperature: 10 to15°C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4099X68912B | RTP Company | PPA | RTP |
| QR Resin QR-9066 | QTR, Inc. | Nylon 66 | QR Resin |
| 3M™ Dyneon™ Fluoroplastic PFA 6510GV15WZ | 3M Advanced Materials Division | PFA | 3M™ Dyneon™ Fluoroplastic |
| Generic PVC Copolymer | Generic | PVC Copolymer | Generic |
| LG ABS LG749W | LG Chem Ltd. | ABS | LG ABS |
