Order Products : sales@su-jiao.com
Delas 175
| Category: | PVC+NBR , Polyvinyl Chloride + NBR |
| Manufacturer: | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| Trademark: | Delas |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DUtend_Delas175.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Delas 175 is a PVC NBR material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. The main characteristics of Delas 175 are: chemical resistance. The typical application field of Delas 175 is: wire and cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 12.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 430 | % | ASTM D412 |
| Tear Strength | 36.0 | kN/m | ASTM D624 |
| Compression Set (70°C) | 66 | % | ASTM D395 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Operating Temperature | -26 - 80 | °C | ASTM D746 |
| Tear Permanent Deformation | 76 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 140 - 150 | °C | |
| Middle Temperature | 150 - 160 | °C | |
| Front Temperature | 160 - 170 | °C | |
| Nozzle Temperature | 170 - 180 | °C | |
| Mold Temperature | 10 - 50 | °C | |
| Back Pressure | 0.0700 - 1.00 | MPa | |
| Screw Speed | 100 - 200 | rpm |
| Extrusion instructions |
|---|
| Feed Zone: 140 - 150 °CFeed Section : 150 - 160 °CMetering Section: 160 - 170°CFront Temperature: 170 - 180 °CMold Temperature: 170 - 180 °CFilter: 20-60 mesh |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mowiflex™ FX 407 | Kuraray Co., Ltd. | PVOH | Mowiflex™ |
| Vydyne® R525H BK0201 | Ascend Performance Materials Operations LLC | Nylon 66 | Vydyne® |
| UNINOR® PPO Modified | Nytef Plastics, Ltd. | PPE+PS | UNINOR® |
| FERREX® GPP20CF57HB-GY | Ferro Corporation | PP, Unspecified | FERREX® |
| Hifax CA 7378 A | LyondellBasell Industries | TPO (POE) | Hifax |
