Order Products : sales@su-jiao.com
MIRASON™ FL60
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals, Inc. |
| Trademark: | MIRASON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DRbdWp_MIRASON-FL60.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MIRASON™ FL60 is a Low Density Polyethylene material. It is available in Asia Pacific for injection molding. Important attributes of MIRASON™ FL60 are:
Typical application of MIRASON™ FL60: Caps/Lids/Closures |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 6.96 | MPa | |
| Break | 8.83 | MPa | |
| Tensile Elongation (Break) | 450 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -20.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 76.0 | °C | ASTM D1525 |
| Melting Temperature | 102 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® STAMAX 60YM240 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® STAMAX |
| HiFill® PPS GF40 BK | Techmer Engineered Solutions | PPS | HiFill® |
| LNP™ THERMOCOMP™ YF005 compound | SABIC Innovative Plastics | TPEE | LNP™ THERMOCOMP™ |
| Tunhe PET TH104 | Xinjiang Blueridge Tunhe Chemical Industry Co.,Ltd | PET | Tunhe PET |
| LUVOCOM® 1301-7508 VP | LEHVOSS Group | PPS | LUVOCOM® |
