Order Products : sales@su-jiao.com
Spartech Polycom SC14-1060L
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DMmMta_Spartech-Polycom-SC14-1060L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SC14-1060L is a medium viscosity nylon 6/6 resin for injection molding applications. It is heat stabilized and lubricated for good processing characteristics. Nylons are highly crystalline resins with a sharp melting and freezing point. That characteristic allows for good flow properties when in the melt state, and fast cycle times when cooling in the mold. The highly crystalline characteristic also brings high strength properties and wear resistance. A very versatile product for a wide variety of applications, Spartech SC14-1060L is recommended for industrial, transportation, sporting goods and electrical/electronic applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 75.8 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 75.5 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 - 93.3 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 249 - 271 | °C | |
| Middle Temperature | 277 - 288 | °C | |
| Front Temperature | 271 - 288 | °C | |
| Nozzle Temperature | 277 - 288 | °C | |
| Processing (Melt) Temp | 271 - 293 | °C | |
| Mold Temperature | 37.8 - 93.3 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XANTAR® MX 1004 | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| Karina RED COLOR CONCNETRATE 42/155-RG-GE (CS) | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| PAmpellonne® 606s | Politem Plastik Ltd. | Nylon 66 | PAmpellonne® |
| SIBUR Synthetic Rubber IR SKI-3 Group I | SIBUR | IR | SIBUR Synthetic Rubber |
| CYCOLAC™ MG37EPX resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
