Order Products : sales@su-jiao.com
Estane® 58123 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DKCSgA_Estane-58123-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Polyether Thermoplastic Polyurethane (TPU) Special Feature: Moisture Vapor Transmission, with Excellent Low Temperature and Elasticity. Low Moisture Absorption Processes: Extrusion: Blown, Flat Die Cast Film, Injection and Cable Jacketing |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 17.0 | mg | ASTM D3389 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Transmission | 420 | g/m²/24 hr | ASTM E96 |
| Water Vapor Transmission - Mocon 1(38°C) | 3200 | g/m²/24 hr | ASTM D6701 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Kofler Melting Temperature | 150 | °C | Internal method |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 6 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.40 | MPa | ASTM D412 |
| 300% strain | 5.50 | MPa | ASTM D412 |
| Tensile Strength (Break) | 36.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 730 | % | ASTM D412 |
| Tear Strength | |||
| -- 2 | 66.7 | kN/m | ASTM D624 |
| Cracking | 20 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -70.0 | °C | ASTM D3418 |
| Melting Temperature | 135 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 180 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 171 | °C | |
| Cylinder Zone 2 Temp. | 177 | °C | |
| Cylinder Zone 3 Temp. | 182 | °C | |
| Cylinder Zone 4 Temp. | 188 | °C | |
| Adapter Temperature | 193 | °C | |
| Melt Temperature | 191 | °C | |
| Die Temperature | 193 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack: 20/40/80 mesh |
| Note Message | |
|---|---|
| 1 . | 90% RH |
| 2 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam PFB139E | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| Novalloy-A A2606 | PlastxWorld Inc. | ABS+Nylon | Novalloy-A |
| CENUSIL® R 150 | Wacker Chemie AG | Silicone | CENUSIL® |
| ELASTOSIL® LR 3842/40 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| Hanwha Total PE 431G | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | LDPE | Hanwha Total PE |
