Order Products : sales@su-jiao.com
Braskem PE CP 100
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DKCGR1_Braskem-PE-CP-100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CP 100 is a heterophasic copolymer of propylene and ethylene. This grade has high melt flow rate and very high stiffness. It was developed for parts with complex design and it allows fast cycles injection of thin-walled parts and excellent organoleptic properties. Applications: Automotive parts, parts with a complex design and thin-walled parts. Processing: Injection Moulding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 100 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 99 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 4.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C, Injection Molded | 20 | J/m | |
| 23°C, Injection Molded | 25 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 115 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 64.0 | °C | |
| Vicat Softening Temperature | 150 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CONTINUUM™ DMDE-1250 NT 7 | The Dow Chemical Company | HDPE | CONTINUUM™ |
| Generic Epoxy - Ceramic Bead | Generic | Epoxy | Generic |
| Elexar® EL-3954-50 | Teknor Apex Company | TPE | Elexar® |
| LEXAN™ ML3400 resin | SABIC Innovative Plastics Europe | PC | LEXAN™ |
| LNP™ LUBRICOMP™ DL001 compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
