Order Products : sales@su-jiao.com
SOLLAMID B 2720
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Krisoll Resinas Plásticas Ltda. |
| Trademark: | SOLLAMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DIkLR1_SOLLAMID-B-2720.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SOLLAMID B 2720 is a Polyamide 6 (Nylon 6) material. It is available in Latin America. Primary attribute of SOLLAMID B 2720: Flame Rated. |
| General Information |
|---|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.14 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.2 to 1.6 | -- | % | |
| Water Absorption (23°C, 24 hr) | 1.3 | -- | % | ASTM D570 |
| Heat Stability | 80 | -- | °C |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale, 23°C) | 120 | 100 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 2900 | 1300 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 75.0 | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 50 | 120 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2900 | 1000 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 100 | 40.0 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Unnotched Izod Impact (23°C) | 45 | 85 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 170 | -- | °C | |
| 1.8 MPa, Unannealed | 75.0 | -- | °C | |
| Melting Temperature | 214 to 220 | -- | °C | |
| CLTE - Flow | 7.0E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | -- | ohms·cm | ASTM D257 |
| Dielectric Strength | 18 | -- | kV/mm | ASTM D149 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | V-2 | -- | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer SV-18000U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Tenac™-C EF750 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| Amodel® AE-1133 | Solvay Specialty Polymers | PPA | Amodel® |
| EVICOM™ GH3/803 | INEOS Compounds | PVC, Flexible | EVICOM™ |
| Ecodear® V554X51 | Toray Resin Company | PLA | Ecodear® |
